Polyethylene thermoplastics manufactured from petroleum include high-density polyethylene (HDPE) and polyethylene high-density (PEHD). HDPE has numerous uses and is resistant to many different solvents.
For many years, applications including potable water, sewers, mining, and gas have all used High-Density Polyethylene (HDPE) Solid Pipe. As a favoured material for pipeline lining and relining, slurry application, and use in Dolomite areas, it is expanding quickly. HDPE pipe is not advised in applications where the fluid temperature is higher than 50’C.
Polyfab is a manufacturer of high-quality HDPE Black pipes in Ethiopia, Kenya, and Ghana as well as a distributor of pipe fittings in Ethiopia, Kenya, and Ghana. To ensure quality, stringent quality controls have been implemented at various stages of the manufacturing process.
HDPE pipes, such as water pressure pipes, can be joined together using a process known as butt fusion, in which the pipe ends are heated and joined together. In trenchless applications where digging is difficult or impossible, this type of polyethylene pipe can be used. Black HDPE pipes are used in natural gas transmission, where a leak rate of zero is critical. A good subsurface HDPE drainage system is designed in terms of drain layout, depth, and spacing.
Polyfab provides HDPE drainage pipes in Ethiopia, Kenya, and Ghana and custom-made HDPE manholes to create the most effective drainage system for your requirements in Ethiopia, Kenya, and Ghana.
• Above and below ground installations in mining
• Slurry Lines are used to transporting suspended solid matter in quarries and mines
• Chemical and industrial - to transport corrosive fluids
• Submerged pipelines are used for cable ducting, water, and sewerage systems
• Distribution of Gas
• Trenchless construction is used for water supply, sewers, and gas lines.
